|DIRECTIONS FOR USE:
Snappi® fasteners must be used responsibly, and need to be used correctly in order to work effectively.
1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size, and in so doing, will pull the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand, and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go!
2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi®, hold onto the solid part of the tab. DO NOT pull on the loops. So,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.
By following these instructions, the Snappi® should be secure and the diaper will fit snugly. ALWAYS place a cover over the diaper and Snappi® fastener.